Weld Studs
- Full Thread Drawn Arc Stud - Mild Steel
- Full Thread Drawn Arc Stud - Nickel Plated
- Full Thread Drawn Arc Stud - Stainless Steel
- Partial Thread Drawn Arc Stud - Mild Steel
- Partial Thread Drawn Arc Stud - Stainless Steel
- Reduced Base Drawn Arc Studs
- No Thread Drawn Arc Stud
- Collar Drawn Arc Studs
- Tapped (Internal Thread) Arc Studs
- Headed Anchor/Shear Connector Studs
- Knock Off Arc Studs
- Deformed Bar Anchor Studs
- Specialty Arc Studs
ARCRBM10X28NP-100
M10-1.50 Arc Stud Reduced Base Nickel Plated with R Ferrules
$39.34 - $250.00
Arc Reduced Base Weld Studs are used when there is a need to contain the fillet diameter within the major diameter of the thread.
Material: Low carbon steel, Nickel plated
Length: Length is before weld. Stud diameters ½” and below will be approximately 1/8” shorter after welding. 5/8” to ¾” diameters will be approximately 3/16” shorter after welding.
Thread: Standard UNC2A
Ferrules: Includes required Reduced Base (F-106) ceramic ferrules (insulators)
Flux: Solid Fluxed
Mechanical Properties (as cold drawn):
- Tensile: 55,000 psi min
- Reduction in Area: 50% Min