Weld Studs
- Full Thread Drawn Arc Stud - Mild Steel
- Full Thread Drawn Arc Stud - Nickel Plated
- Full Thread Drawn Arc Stud - Stainless Steel
- Partial Thread Drawn Arc Stud - Mild Steel
- Partial Thread Drawn Arc Stud - Stainless Steel
- Reduced Base Drawn Arc Studs
- No Thread Drawn Arc Stud
- Collar Drawn Arc Studs
- Tapped (Internal Thread) Arc Studs
- Headed Anchor/Shear Connector Studs
- Knock Off Arc Studs
- Deformed Bar Anchor Studs
- Specialty Arc Studs
Equipment
FG138
Ferrule Grips
$6.00 - $22.00
Ferrule Grips, sometimes called Ferrule Holders, are used on the drawn arc stud gun to hold the ferrules during the stud welding process.
These closed ferrule grips are generally used with studs 2" or shorter. For longer studs use a split ferrule grip and split arc foot to make it easier to load studs in the gun.
1" Long, Brass
Stud Welder Manufacturer Part Numbers:
| Size | Nelson | Proweld/ Truweld |
Image | Midwest Fasteners | Erico/KSM |
| 10 Gauge & # 6 | 501001002 | 102-0401-01 | 000-297 | ||
| #8 | 501001003 | 102-0401-13 | 039-138 | ||
| #10 (3/16") | 501001004 | GN-019 | G19 | 102-0401-02 | 000-284 |
| 1/4" | 501001005 | GN-025 | G25 | 102-0401-03 | 000-285 |
| 5/16" | 501001006 | GN-031 | G31 | 102-0401-04 | 000-286 |
| 3/8" | 501001007 | GN-037 | G37 | 102-0401-05 | 000-287 |
| 7/16" | 501001008 | GN-043 | G43 | 102-0401-06 | 000-288 |
| 1/2" | 501001009 | GN-050, | G50 | 102-0401-07 | 044-077 |
| 5/8" | 501001011 | GN-062 | G62 | 102-0401-08 | 048-310 |
| 3/4" | 501001014 | GN-075 | G75 | 102-0401-09 | 044-076 |
| 7/8" | 501001015 | GN-087 | G87 | 102-0401-10 | 044-075, |
| 1" | 501001016 | GN-100, | G1 | 102-0401-11, | 000-294 |
| 6mm | GN-006M, | ||||
| 8mm | GN-008M | ||||
| 12mm | GN-012M |