ACS330X058W3/8-16X058MSCC-100

330 X 5/8" with 3/8-16 X 5/8" Arc Collar Stud MS CC with C Ferrules

Not seeing what you're looking for? Request it.

Part Request

Pickup available at Pagni Drive

Usually ready in 24 hours

The collar on these partially threaded drawn arc weld studs acts as a spacer between the workpiece and parts installed on the studs after they have been welded to the workpiece. A short base section is melted off during the welding process. Sometimes called Partially Threaded Drawn Arc Weld Studs with Collar, the studs form strong, vibration-resistant welds that provide a tight seal against water, oil, air, or gas leaks at the weld point. 

Material: Low Carbon Steel ASTM A29/A108 Grades 1010-1020, Copper Coated

Length: Length is before weld.  Will be approximately 1/8" shorter after welding.

Thread: Standard UNC2A 

Ferrules: Includes required ceramic ferrules (insulators) (Other types of ferrules available on request)

Flux: Solid Fluxed

Mechanical Properties (as cold drawn):

  • Tensile: 61,000 psi min
  • Yield Strength: 49,000 psi min
  • Elongation (% in 2 in.): 17% min.
  • Elongation (% in 5x dia.): 14% min
  • Reduction in Area: 50% Min

Quantity: 100 pcs

Spec Sheet Download

Contact Us

Have a question?  Can’t find what you need? Want a quote? Want to check availability? 

Call our stud welding experts at 800-426-5667. You will reach a real LIVE person M-F 7:30 am - 4 pm CST.

Or reach out anytime through our contact form.  Emails are typically answered during business hours within 1-2 hours.