Weld Studs
- Full Thread Drawn Arc Stud - Mild Steel
- Full Thread Drawn Arc Stud - Nickel Plated
- Full Thread Drawn Arc Stud - Stainless Steel
- Partial Thread Drawn Arc Stud - Mild Steel
- Partial Thread Drawn Arc Stud - Stainless Steel
- Reduced Base Drawn Arc Studs
- No Thread Drawn Arc Stud
- Collar Drawn Arc Studs
- Tapped (Internal Thread) Arc Studs
- Headed Anchor/Shear Connector Studs
- Knock Off Arc Studs
- Deformed Bar Anchor Studs
- Specialty Arc Studs
Nelson NCD Gap Gun Exploded View Diagram and Parts List
Nelson #751-650-000
| ITEM | QTY | PART NUMBER | DESCRIPTION | HANLON PART# | ||
| 1 | 1 | 751-650-001 | GUN BODY - RIGHT |
751-650-001 |
||
| 2 | 1 | 751-650-002 | GUN BODY - LEFT | 751-650-002 | ||
| 3 | 1 | 751-650-003 | COVER, FRONT, MACHINED | 751-650-003 | ||
| 4 | 1 | 751-650-005 | CAP, REAR, NCD+ CONTACT WELDGUN | 751-650-005 | ||
| 5 | 1 | 751-650-006 | BEARING, FRONT | 751-650-006 | ||
| 6 | 1 | 751-650-007 | BELLOWS, NCD+/NCD_ HANDGUN | 751-650-007 | ||
| 7 | 2 | 751-650-008 | WASHER LEG M5 | 751-650-008 | ||
| 8 | 1 | 751-650-009 | NUT, CHUCK | 751-650-009 | ||
| 9 | 2 | 751-650-012 | LOCATING PIN | 751-650-012 | ||
| 10 | 1 | 751-650-013 | LIFTING ROD ASM | 751-650-013 | ||
| 11 | 1 | 751-650-017 | COIL ASSEMBLY | 751-650-017 | ||
| 12 | 1 | 751-650-019 | RETAINER, SPRING | 751-650-019 | ||
| 13 | 1 | 751-650-020 | NUT, ADJUSTING SPRING | 751-650-020 | ||
| 14 | 1 | 751-650-021 | SCREW, ADJUSTING, SPRING | 751-650-021 | ||
| 15 | 1 | 751-650-022 | WASHER M4 | 751-650-022 | ||
| 16 | 1 | 751-650-023 | SWITCH, TRIGGER ASM | 751-650-023 | ||
| 17 | 1 | 751-650-027 | TRIGGER BUTTON | 751-650-027 | ||
| 18 | 1 | 751-585-021 | E-RING | 751-585-021 | ||
| 19 | 1 | 87-05-22 | TRIGGER SPRING, 4 WIRE | 87-05-22 | ||
| 20 | 1 | 720-517-000 | WELD CABLE JUMPER | 720-517-000 | ||
| 21 | 4 | 524-005-097 | SCREW, M5X5 FPSS |
|
||
| 22 | 2 | 524-005-007 | SCREW, M8X8 FPSS | 524-005-007 | ||
| 23 | 1 | 511-001-131 | SPARK SHIELD | 511-001-131 | ||
| 24 | 3 | 524-005-100 | SCREW M4X16 OHMS | 524-005-100 | ||
| 25 | 2 | 524-005-101 | SCREW, M5X16 FHSC | 524-005-101 | ||
| 26 | 1 | 524-005-102 | SCREW, M4X12 | 524-005-102 | ||
| 27 | 1 | 524-005-104 | NUT M5 THICK | 524-005-104 | ||
| 28 | 1 | 524-005-105 | SCREW M5X10 SHC | 524-005-105 | ||
| 29 | 1 | 524-005-003 | SCREW, M4X6 FPSS | 524-005-003 | ||
| 30 | 1 | 729-023-017 | WASHER 5MM CONICAL SPRING | 729-023-017 | ||
| 31 | 1 | 726-013-002 | COLLET, NCD/NCD+HANDGUN | |||
| 32 | 1 | 502-001-347 | SPRING, MAIN, NCD CONTACT GUN | 502-001-347 | ||
| 33 | 1 | 502-001-261 | FOOT | 502-001-261 | ||
| 34 | 2 | 504-001-056 | LEG, 8MM X 110MM | 504-001-056 | ||
| 35 | 1 | 527-003-094 | BEARING | |||
| 36 | 2 | 524-005-103 | SCREW, M3X5 LHS | |||
| 37 | 1 | 729-023-025 | PIN, GROOVED | |||